Cavaliere SV218F-36 Instruction Manual download pdf (Page 13)

Page 11

Upper chimney

Wall mount

range hood

Lower chimney

Motor housing

Electric circuit box

(Location varies)

6” Round duct (exhaust)

Re-circulating kit exhaust

(Re-circulating kit not shown)

Duct work and electric

wiring region

Note: Type “A” anchors are designed

for dry wall. Not to be used with any

other types of walls.

Calculate8. the height of the duct tube and extend approximately 6 inches longer than required, connect the lower

end of the duct tube to the range hood and the upper end to the vent system (or air diverter). Make sure the

main electrical supply remains disconnected then connect power plug to the electrical cord or wall plug.

Have one person carefully position both upper and lower chimneys on the range hood, let the second person 9.

slide the sides of the chimneys into the 1/16” gap. Fasten both chimneys with four Type “C” screws.

Install grease cup and aluminum lters then check the operation of the range hood.10.

Installation Overview

Mounting Bracket

A B

Installation (Continued)

Hex Key

Qty: 1 PCS

(Optional with glass canopy)

Glass Canopy Screw

Qty: 4 PCS

(Optional with glass canopy)

Qty: 4 PCS

(For sheet rock only)

Qty: 4 PCS

Qty: 4 to 8 PCS

(Vary with model)

Air Movement Direction

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

No comments

Cavaliere SV218F-36 Instruction Manual Page 13