Cavaliere UC200-1830S Use and Care Manual download pdf (Page 17)

Troubleshooting

If the range hood or halogen light does not operate 1.

after installation:

Check if the range hood has been plugged in, make •

sure that all power has been turned back ON, fused

not blown and all electrical wiring are properly con-

nected.

Swap out light assembly to working ones to deter-•

mine whether it is caused by defective bulbs. See

Replacing the light bulbs on Page 22.

The range hood vibrates when the blower is on:2. The range hood might not have been secured prop-•

erly on to the ceiling or wall.

The blower or fan seems weak:3. Check that the duct sized used is at least 6” or 3-1/4 •

x 10”. Range hood WILL NOT function efciently

with insufcient duct size. For example: 7” duct

over 6” hole and loosely secured.

Check if duct is clogged or if damper unit (half-cir-•

cular apper) is not installed correctly or opening

properly. A tight mesh on a side wall cap unit might

also cause restriction to the air ow.

The lights work but the blower is not spinning at all, 4.

is stuck or is rattling.

The blower might be jammed or scraping the bot-•

tom due to shipping damage. Please contact us im-

mediately.

The hood is not venting out properly:5. Make sure the distance between the stove top and •

the bottom of the hood is within* 27” and 30” in

distance. *Due to different ceiling height congura-

tions, recommended height may not be applicable.

Reduce the number of elbows and length of duct •

work. Check if all joints are properly connected,

sealed, and taped.

Make sure the power is on high speed for heavy •

cooking.

NOTE: For all other inquiries, please contact us. Our contact information can be found on the back cover.

Page 15

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

No comments

Cavaliere UC200-1830S Use and Care Manual Page 17